DIGGA'S AUGERS FOR EXCAVATOR 9-12T
Digga's range of drilling augers for 9-12t excavators are the ultimate in performance, quality and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Completely manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.
9DDS SPECS
Torque (FT-LBS @ 3000 PSI): 7,811
Max Torque (FT-LBS @ 3500 PSI): 9,112
Recommended Flow: 18-48
Motor Type: Eaton
Max Pressure (Do Not Exceed): 3500 PSI @ 29 GPM
Max Flow (Do Not Exceed): 55 GPM @ 1800 PSI
Max Horse Power: 60
Pressure Relief Valve: INCLUDED
Standard Output Shaft: 2.5" Hex
Recommended Auger: A8/RC8
Max Drilling Diameter (Clay/Shale): 48"
Max Drilling Diameter (Earth): 48"
Weight (lbs): 350
Overall Length (in): 37.2"
Diameter (in): 11.4"
12DDS SPECS
Torque (FT-LBS @ 3000 PSI): 9,893
Max Torque (FT-LBS @ 3500 PSI): 11,542
Recommended Flow: 22-48
Motor Type: Eaton
Max Pressure (Do Not Exceed): 3500 PSI @ 29 GPM
Max Flow (Do Not Exceed): 55 GPM @ 1800 PSI
Max Horse Power: 60
Pressure Relief Valve: INCLUDED
Standard Output Shaft: 2.5" Hex
Recommended Auger: A8/RC8
Max Drilling Diameter (Clay/Shale): 36"
Max Drilling Diameter (Earth): 48"
Weight (lbs): 350
Overall Length (in): 37.2"
Diameter (in): 11.4"
Manufacturer's Page:
https://www.diggausa.com/augers-9-12T.php